Canon imageFORMULA DR-G1130 マニュアル

10-10

■ Detecting when multiple documents have been 

Enable the [Double Feed Detection] check box in the  
[Feeding] tab. Either [Detect by Length] or [Detect by 
Ultrasonic] can be enabled singly, or both together

Even if Detection by ultrasonic is enabled, double feeds may not 
be detected if the document size is small. 

■ Saving data by document bundle (batch 

If using batch separation, you can save the data in units of 
the document bundles placed in the tray. In this case, set 
the scanner drivers as described below.  

Set the [Feeding Option] in the [Feeding] tab to [Panel-
Feeding] or [Automatic Feeding]. 

Set the [Batch Separation] in the [Others] tab to [Auto] or 
[Panel].

When the [Batch Separation] is set to [Auto], and the next 
documents have been set so scanning is continuous, the 
batches are separated. 

When [Batch Separation] is set to [Panel], and the [New 
File] key on the control panel is pressed, batch separation 
is implemented, so the batches can be separated after 
multiple bundles have been scanned.

• When [Feeding Option] on the [Feeding] tab is set to 

[Standard Feeding], [Auto] and [Panel] in [Batch Separation] 
are disabled.

• To use the batch separation function, suitable application 

software is required.

You can register the scanning conditions so that you can use 
them next time.

■ Registering scanning conditions

Press the [Save] button in the user settings to add a name 
to the scan conditions and implement registration. When 
you want to use the registered scanning conditions, select 
the registered name to apply the registered set conditions.