Canon imageFORMULA DR-G1130 マニュアル
2-6
Chapter 2 Setup
4.
Connecting the Scanner to the Computer
Use a USB port to connect the device to the PC.
Interface Connector Locations
The USB connector is located on the scanner as shown below.
IMPORTANT
• Use only the supplied power cord.
• The scanner and computer should both be turned OFF when
• The scanner and computer should both be turned OFF when
making connections.
Connecting the Scanner to the Computer
To connect to the computer, follow the procedure for the
intended connection method.
intended connection method.
■ Using a USB Connection
1.
Connect the supplied power cord into the power
connector on the back of the scanner. (1)
connector on the back of the scanner. (1)
2.
Connect the power cord into an AC outlet. (2)
Power Connector
USB
Connector
120 V Type
220 - 240 V Type