Canon imageFORMULA DR-G1130 マニュアル
5-14
Chapter 5 Maintenance
3.
Detaching and attaching the separation pad (retard roller cover)
When replacing the separation pad, perform the following steps to detach it from and attach it to the unit.
When to replace the separation pad (retard
roller cover)
roller cover)
The separation pads are consumables that must be replaced
after feeding about every 6,000,000 pages.
A worn separation pad is no longer able to correctly feed a
document and can cause paper jams. If documents no longer
feed correctly as frequent double-feed, replace the separation
pad.
after feeding about every 6,000,000 pages.
A worn separation pad is no longer able to correctly feed a
document and can cause paper jams. If documents no longer
feed correctly as frequent double-feed, replace the separation
pad.
Detaching and attaching the separation
pad (retard roller cover)
pad (retard roller cover)
■ Detaching the separation pad (retard roller
cover)
1.
Open the upper unit smoothly.
2.
Grasp and pull the retard roller cover with your
fingers to remove it.
fingers to remove it.
■ Attaching the separation pad (retard roller
cover)
1.
Replace the retard roller cover.
2.
Push the front of the retard roller cover in. Make sure
to hear a latching sound that it is securely returned to
its original position.
to hear a latching sound that it is securely returned to
its original position.
3.
Smoothly close the upper unit.
CAUTION
Make sure that the hook is completely latched and the retard
roller cover is not loose. If the retard roller cover is loose, the
Document Feed Tray will catch on it causing the scanner to
malfunction.
roller cover is not loose. If the retard roller cover is loose, the
Document Feed Tray will catch on it causing the scanner to
malfunction.