Canon imageFORMULA DR-C240 マニュアル

22

The scanner can scan documents ranging in size from business cards 
to LTR/A4. The document sizes that this scanner can scan are shown 
below.

Size

Width:  50.8 mm to 216 mm (2" to 8.5")
Length:  54 mm to 356 mm (2.1" to 14") (You can scan 

documents up to 3,000 mm (118.1") long by setting the 
scanner to the Long Document mode.)

Paper thickness

Normal feed: 

27 to 209 g/m

2

 (7 to 56 lb bond) 0.04 mm 

to 0.25 mm (0.00157" to 0.00984")

Non separation feed: 27 to 255 g/m

2

 (7 to 68 lb bond) 0.04 mm 

to 0.3 mm (0.00157" to 0.0118")

Loading capacity

A4 size or smaller:  60 sheets (80g/m

2

 (21 lb bond))

Larger than A4 size: 40 sheets (80g/m

2

 (21 lb bond))

Make sure stacks do not exceed 6 mm in height for either of the 
above.

The documents to be scanned must satisfy certain criteria. Read the 
following items carefully.

• When scanning multiple documents of different sizes, place the 

documents so that they cover the entire span of the feed rollers by 
aligning the centers and leading edges of the documents.

• It is recommended that documents exceeding 356 mm (14") size 

are fed one sheet at a time.

• Scanning documents before the ink is dry can cause problems with 

the scanner. Always make sure that the ink on a document is dry 
before scanning it.

• Scanning documents that are written in pencil or similar material 

may make the rollers and scanning glass dirty, which can lead to 
smudges on the scanned image and transfer the dirt to subsequent 
documents. Always clean the internal parts of the scanner after 
scanning such documents.

• When scanning a two-sided document that is printed on thin paper, 

the image on the opposite side of each page may show through. In 
this case, adjust the scanning intensity in the application software 
before scanning the document.

• Laminated documents may not be scanned correctly, depending 

on the document.

☮䳎ቑ₼㉒ት㙒ራቮ

☮䳎ቑ⏗䵾ት㙒ራቮ

俵侨ዊዙ዆ዙ

Feed roller

Align the leading edges

Align the centers