Canon imageFORMULA P-208II マニュアル

There is an Auto Start switch at the rear of the scanner for setting whether 
to operate the scanner as a storage device.

Depending on the position of the Auto Start switch, the scanner operates 
as shown below.

• Turn the Auto Start switch ON or OFF before you connect the scanner to a 

computer. If it is turned ON or OFF after the scanner is connected to a 
computer, the scanner may not operate properly.

• When you use the scanner with the Auto Start switch turned ON, the 

computer needs to be started before you connect the scanner to the 
computer. If the scanner is connected to a computer that is not started 
and the feed tray of the scanner has been opened to turn ON the power, 
the computer may not be able to start.

Opening the scanner document feed tray switches on the power 
supply automatically. 

The scanner turns ON, and the Start button lights.

ON

The scanner is recognized as a storage device by the 
computer. Starting CaptureOnTouch Lite preinstalled in 
the scanner enables you to perform scanning on a 
computer without the scanner driver installed. (However, 
you cannot store scanned images or any other data on 
the scanner.)

OFF

The scanner is recognized as a scanning device by the 
computer. You can connect the scanner to a computer 
with the scanner driver installed, and perform scanning 
using an application, such as the supplied 
CaptureOnTouch.

