Canon LV-7292M 取り扱いマニュアル

38

Select 

Digital zoom +. The On-Screen Menu 

disappears and 

D. zoom + appears. Press the 

OK button to expand the image size. Use the 

Point ▲▼◄► buttons to pan the image. The 

Panning function can work only when the image 

is larger than the screen size. A projected image 

can be also expanded by pressing the D.ZOOM 

+ or the OK button on the remote control unit. 

To exit the Digital zoom +/– mode, press any 

button except the D.ZOOM 

+/– buttons, OK and 

Point buttons.

Select 

Digital zoom –. The On-Screen Menu 

disappears and 

D. zoom – appears. Press the 

OK button to compress image size. 

The projected image can be also compressed by 

pressing the D.ZOOM 

– or the OK button on the 

remote control unit.  

To return to the previous screen size, select a 

screen size from the Screen Size Adjustment 

Menu or select an input source from the Input 

Source Selection Menu (see page 30) again, 

or adjust the screen size with the D.ZOOM 

+/– 

buttons.



  •  The  minimum  compression  ratio  is  limited 

depending on the input signal, when the Keystone 

function is working or when the custom is selected 

for the screen size.

  • 

True  and  Digital  zoom  +/–  are  disabled  and 

cannot be displayed when 

480i, 575i, 480p 575p, 

720p,1035i or 1080i is selected in the PC System 

Menu (p.31).

  • 

Digital zoom +/- cannot be selected when True is 

selected.

  •  The  minimum  compression  ratio  is  limited  at 

Normal screen size.

LV-RC06

When this function is set to 

On, the picture 

will be top/bottom and left/right reversed. This 

function is used to project the image from a 

ceiling-mounted projector.

When this function is set to 

On, the picture will 

be left/right reversed. This function is used to 

project the image from rear of the screen.

To reset the adjusted data, select Reset and 

press the

OK button. A confirmation box appears and then 

select Yes. All adjustments will return to their 

previous figures.

This function is used to adjust keystone 

distortion of the  projected image. Use the Point 

▲▼ buttons to choose the item you want to 

adjust.

    To correct keystone distortion, press the OK 

button.  

Keystone appears on the screen. Use the 

Point ▲▼ buttons to correct keystone 

distortion (p.26).

    To store or reset the keystone correction, 

press the Point ► button.

Store ..........   Keep the keystone correction 

even when the AC power cord 

is plugged out or turned off the 

projector.

    

Reset .......... Release  the  keystone  correction 

when  the  AC  power  cord  is 

plugged out.

Press the OK button.