Canon REALiS WUX10 Mark II D ユーザーズマニュアル
101
Setting Various Function
Setting Up Functions fr
om
Menu
Menu
s
Resetting the Lamp Counter
[Other settings] - [Lamp counter]
You can reset the lamp counter that indi-
cates the timing to replace the projector
when you replace it.
cates the timing to replace the projector
when you replace it.
Press the OK button after selecting [Lamp
counter], and the lamp counter is dis-
played.
counter], and the lamp counter is dis-
played.
Select the [Reset] and press the OK but-
ton.
ton.
Select [OK] on the screen for confirmation,
press the OK button, and the lamp counter
is reset.
press the OK button, and the lamp counter
is reset.
Press the MENU button.
■ About the Display of the Lamp Counter
The lamp counter displays the hours of
use of the lamp in the following way:
The lamp counter displays the hours of
use of the lamp in the following way:
Less than 1,800 hours
Displayed in green bar.
Displayed in green bar.
1,800 – less than 2,000 hours
Displayed in green and yellow bar.
Displayed in green and yellow bar.
For 1,800 - 1,900 hours, a message
"Obtain a new lamp." appears when power
is turned on.
"Obtain a new lamp." appears when power
is turned on.
HDMI
COMPONENT
DIGITAL PC
VIDEO
ANALOG PC
Do not reset the lamp counter except
when you have replaced the lamp. Oth-
erwise, the lamp counter cannot indi-
cate the correct timing for replacing the
lamp. For the details of the lamp
replacement, refer to the page
when you have replaced the lamp. Oth-
erwise, the lamp counter cannot indi-
cate the correct timing for replacing the
lamp. For the details of the lamp
replacement, refer to the page
.
Other settings
System settings
Lamp counter