Canon imageFORMULA CR-80 マニュアル

ページ / 58
45
Maintenance
This chapter describes how to clean and maintain the scanner.
To ensure high-quality image scanning, regularly clean your CR-50/80 
as described below.
CAUTION
Before you clean the scanner, turn OFF the scanner and computer, 
and disconnect the power cord from the power outlet. Otherwise, it 
may cause an electrical shock.
Never clean the scanner with any kind of organic solvent, such as 
alcohol, benzene, or paint thinner. This may cause a fire and electrical 
shock, or cause the exterior of the scanner to disfigure or discolor.
Never spray mild detergent or water directly on the scanning glass. 
The spray could penetrate below the glass and contaminate the 
internal light source and lenses.
Cleaning the Main Unit
Wipe the scanner with a firmly wrung cloth, moistened slightly with 
water or mild detergent. Then, wipe off with a clean, dry cloth.
Cleaning the Inside of the Scanner
Dust or paper particles inside the scanner can cause lines in scanned 
images. Use compressed air for regular cleaning of dust and paper 
particles from inside the scanner. After finishing a large scanning job, 
you should turn OFF the scanner and then clean off any paper particles 
that are remaining.
Cleaning the Scanning Glass and Rollers
If stripes appear on scanned images or if dirt appears on scanned 
documents, clean the scanning glass and rollers. Clean the scanning 
glass and rollers regularly.
A
Hook your finger around the open lever and open the 
Maintenance Cover.
Daily Cleaning