Canon Speedlite Transmitter ST-E3-RT 取り扱いマニュアル
35
q: Wireless Multiple Flash Shooting with Manual Flash Output
Stroboscopic flash is an advanced manual flash shooting method.
When using stroboscopic flash with a slow shutter speed, you can shoot
multiple successive movements within a single picture, similar to stop-
motion pictures.
In stroboscopic flash, set the flash output, number of flashes, and flash
frequency (number of flashes per second = Hz). For the maximum
number of continuous flashes, see page 37.
When using stroboscopic flash with a slow shutter speed, you can shoot
multiple successive movements within a single picture, similar to stop-
motion pictures.
In stroboscopic flash, set the flash output, number of flashes, and flash
frequency (number of flashes per second = Hz). For the maximum
number of continuous flashes, see page 37.
1
Set the flash mode to <?>.
Press the <E> button on the
master unit and set to <?>.
master unit and set to <?>.
2
Set the firing groups and the flash
output.
output.
Set the number of firing groups and
the flash output for each group by
referring to the manual flash on the
preceding page.
the flash output for each group by
referring to the manual flash on the
preceding page.
3
Set the flash frequency and the
number of flashes.
number of flashes.
While <M> is displayed, perform
the following procedure.
the following procedure.
To set the number of flashes, press
function button 2 <Q>, turn
<9> and select <8>.
function button 2 <Q>, turn
<9> and select <8>.
To set the flash frequency, press
function button 3 <G>, turn
<9> and select <8>.
function button 3 <G>, turn
<9> and select <8>.
?: Stroboscopic Flash
COP
Y