Canon EOS C100 取り扱いマニュアル

79

Recording Audio

Adjusting the Microphone’s Sensitivity

You can adjust the microphone’s sensitivity if the XLR terminal switch is set to MIC or MIC+48V.

1 Open the desired XLR terminal’s sensitivity submenu.

[¡ Audio Setup] > [Audio Input] > [XLR1 Mic Trimming] or [XLR2 Mic Trimming]

2 Select the desired level and then press the joystick.

Available Sensitivity Levels

Activating the Microphone’s Attenuator

You can activate the microphone’s attenuator (20 dB) if the XLR terminal 
switch is set to MIC or MIC+48V.

1 Open the desired XLR terminal’s microphone attenuator submenu.

[¡ Audio Setup] > [Audio Input] > [XLR1 Mic Att.] or [XLR2 Mic 
Att.]

2 Select [On] and then press the joystick.

Monitoring the Audio with Headphones

Connect headphones* to the × (headphone) terminal to monitor the 
recorded audio. You can adjust the headphone volume with the 
[¡ Audio Setup] > [Audio Output] > [Headphone Volume] setting.

* For 50.00 Hz recordings, use commercially available headphones with a cable no 

longer than 3 m.

NOTES

• If you set an assignable button to [Headphone +] or [Headphone -] 

(A 87), you can press the button to adjust the headphone volume 
without using the menu.

• When you are monitoring the audio, you can choose to synchronize the 

audio signal with the video signal or monitor the audio in real time. Use 
the [¡ Audio Setup] > [Audio Output] > [Monitor Delay] setting to 
select the method. Note that there will be a slight delay when you monitor in real time. Regardless of the 
setting, however, the audio and video signals recorded will be synchronized.

+12 dB

+6 dB

0 dB

-6 dB

-12 dB

[¡ Audio Setup]

[

Audio Input]

[XLR1 Mic Trimming]

[XLR2 Mic Trimming]

[0 dB]

[¡ Audio Setup]

[Audio Input]

[XLR1 Mic Att.]

[XLR2 Mic Att.]

[Off]

× (headphone) 
terminal

COP

Y