Canon DP-V2410 マニュアル
9
Nomenclature
Nomenclature
■
Front face of the main unit
2
1
1
3
4
5
6
7
8
9
1
Stand
There are two mounting positions.
2
Headphone terminal
Connection for headphone set.
3
USB port
Connection for an external sensor for calibration (
22), USB memory, HUB, or color
grading controller (Element-Tk made by Tangent Wave Ltd).
–
4
CH1 to 3 buttons
Changes channel.
5
CDL button
Switches between normal and CDL mode.
–
6
F1 to F8 buttons
Execute the defined function. You can assign different functions on F buttons in the
normal and CDL modes respectively.
normal and CDL modes respectively.
7
MENU button
Opens/closes the OSD menu, or moves up one level in a menu.
Jog dial
Moves the selection frame within the OSD menu, changes the settings (up/down, left/
right, rotation) and determines (press) the selection.
right, rotation) and determines (press) the selection.
RESET button
Resets the items to be adjusted using the slider and entered characters.
8
(Power) button
Turns power On/Off.
9
Power indicator
Displays the status of the main unit. The brightness of the power indicator can be set
from "Off" or "1 (dark) to 5 (brightest)" (
from "Off" or "1 (dark) to 5 (brightest)" (
62). Even when the power indicator is "Off", it
will flash during firmware upgrade, or when an error is detected.
Off: when AC or DC power supply is not connected
Green lit: when an AC or DC power supply is connected and the power of the video
Off: when AC or DC power supply is not connected
Green lit: when an AC or DC power supply is connected and the power of the video
display is on
Green flash: during calibration or firmware upgrade
Amber lit: during standby (an AC or DC power supply is connected and the power of the
Amber lit: during standby (an AC or DC power supply is connected and the power of the
video display is off)
Amber flash: when error is detected
–