Canon EOS REBEL T2i 取り扱いマニュアル
164
You can edit out the first and last scenes of a movie in 1-sec. increments.
1
On the movie playback screen,
select [X].
select [X].
X
The editing screen will be displayed.
2
Specify the part to be edited out.
Select either [U] (Cut beginning) or
[V] (Cut end), then press <0>.
[V] (Cut end), then press <0>.
Press the <U> key to see the
previous or next frames. Holding it
down will fast forward the frames.
previous or next frames. Holding it
down will fast forward the frames.
After deciding which part to edit out, press
<0>. The portion highlighted in blue on
the top of the screen is what will remain.
<0>. The portion highlighted in blue on
the top of the screen is what will remain.
3
Check the edited movie.
Select [7] and press <0> to
playback the portion highlighted in blue.
playback the portion highlighted in blue.
To change the editing, go back to step 2.
To cancel the editing, select [2] and
press <0>.
press <0>.
4
Save the movie.
Select [W], then press <0>.
X
The save screen will appear.
To save it as a new movie, select
[New file]. To save it and overwrite
the original movie file, select
[Overwrite]. Then press <0>.
[New file]. To save it and overwrite
the original movie file, select
[Overwrite]. Then press <0>.
X Editing the Movie’s First and Last Scenes
Since the editing is done in 1-sec. increments (position indicated by
[X]), the exact position where the movie is edited may differ slightly from
the position you specified.
[X]), the exact position where the movie is edited may differ slightly from
the position you specified.
If the card does not have enough room, [New file] will not be selectable.
More movie editing functions are available with ZoomBrowser EX/
ImageBrowser (provided software).
ImageBrowser (provided software).
COP
Y