Canon EOS-1D Mark II N 取り扱いマニュアル
65
With custom white balance, you shoot a white object that will serve as
the basis for the white balance setting. By selecting this image, you
import its white balance data for the white balance setting.
the basis for the white balance setting. By selecting this image, you
import its white balance data for the white balance setting.
1
Photograph a white object.
Make sure the plain, white subject fills
the entire center spot metering circle.
the entire center spot metering circle.
Set the lens focus mode switch to
<
<
g
>, then focus manually. (p.90)
Set any white balance setting. (p.64)
Shoot the white object so that a
standard exposure is obtained. If it is
underexposed or overexposed, a
correct white balance setting might
not be obtained.
standard exposure is obtained. If it is
underexposed or overexposed, a
correct white balance setting might
not be obtained.
2
Select [Custom WB].
Select the <
z
> tab.
Hold down the <
X
> button and
turn the <
5
> dial to select [Custom
WB]. Then let go of the button.
X
The 9-image index display will
appear.
appear.
3
Select the image.
Hold down the <
X
> button and
turn the <
5
> dial to select the image
you shot in step 1. Then let go of the
button.
button.
3
Custom White Balance