Canon imagePROGRAF iPF5100 マニュアル
Messages regarding ink
Not Enough Ink
Cause
Corrective Action
The ink level is low, so you cannot clean the
Printhead .
Printhead .
Open the Ink Tank Cover and replace the Ink Tank
that is low with a new Ink Tank .
(→P.642)
that is low with a new Ink Tank .
(→P.642)
The ink level is low, so there may not be enough ink
to nish printing.
to nish printing.
Open the Ink Tank Cover and replace the Ink Tank
that is low with a new Ink Tank .
(→P.642)
You can print until the ink runs out by pressing the
Online button. However, if the ink runs out during
printing, the following situation will occur depending
on the position of the leading edge when it passes
through the printer.
that is low with a new Ink Tank .
(→P.642)
You can print until the ink runs out by pressing the
Online button. However, if the ink runs out during
printing, the following situation will occur depending
on the position of the leading edge when it passes
through the printer.
1.
No Ink Left is displayed and printing stops. Press
the Stop/Eject button to cancel printing, or open
the Ink Tank Cover , replace the ink tank that is low
with a new one, and continue printing. However,
note that because printing is paused, colors may
be slightly different. (→P.642)
2.
No Ink Left / Canceling page.. is displayed and
printing stops. After the paper is ejected, open the
Ink Tank Cover and replace the ink tank that is low
with a new one. (→P.642)
Error Message 751