Canon VB-H651V 操作ガイド
106
If there is still blur after selecting [On1], select [On2].
The angle of view will be narrower and video noisier when using the Image Stabilizer, compared to when it is not used.
[Smart Shade Control Strength (Auto)]
Select the control strength when [Smart Shade Control] (P. 112) is set to [Auto].
Select the control strength when [Smart Shade Control] (P. 112) is set to [Auto].
• [Mild]: Select if noise is noticeable.
• [Medium]: Recommended setting for Auto mode (default setting).
• [Strong]: Select to increase visibility in dark areas.
[Haze Compensation Strength (Auto)]
Select the strength of compensation when [Haze Compensation] (P. 113) is set to [Auto].
Select the strength of compensation when [Haze Compensation] (P. 113) is set to [Auto].
Note
When [Haze Compensation] is set to [Auto] and [Haze Compensation Strength (Auto)] is set to [Strong], contrast may be strong if the
subject is not obscured by haze. If this happens, set [Haze Compensation Strength (Auto)] to [Mild].
subject is not obscured by haze. If this happens, set [Haze Compensation Strength (Auto)] to [Mild].
[Motion-Adaptive Noise Reduction]
When [Enable] is selected, noise reduction is automatically adjusted according to movement. For scenes in which there is
When [Enable] is selected, noise reduction is automatically adjusted according to movement. For scenes in which there is
little movement, noise reduction is increased and data size decreases.
[Pan/Tilt Speed Control]
Select the pan/tilt control mode.
If [Control by zoom position] is selected, the pan/tilt speed will be slower in telephoto, and faster in wide-angle.
Day/Night (When Auto Is Set)
Set conditions for switching Day Mode and Night Mode when [Day/Night] is set to [Auto].
[Switching Brightness]
Select the brightness for switching Day/Night Mode when [Day/Night] is set to [Auto].
Select the brightness for switching Day/Night Mode when [Day/Night] is set to [Auto].
Select [Darker] if you want to capture video in color as much as possible.
Select [Brighter] to reduce noise. Note that this mode switches to monochrome sooner.
[Response (sec.)]
Select the number of seconds for determining when to switch Day/Night Mode, when [Day/Night] is set to [Auto]. Day/Night
Mode switches when the brightness continues to exceed or fall below the brightness set in [Switching Brightness] within
any of the settings for the number of seconds selected.
Select [30] or [60] if brightness changes frequently, such as when a light source passes in front of the camera. Select [5] or
[10] if change in brightness is minimal.
Installation Conditions
Configure settings for camera use suitable for the location the camera will be installed.
[LED Setting]
Select whether to turn on the LED indicating the camera operation status.
Select whether to turn on the LED indicating the camera operation status.
Important
• The image stabilizer is not effective when the subject is shaking.
• Stabilization is not effective beyond a certain degree of vibration or for momentary vibrations.
• If you select [On2], It is recommended to select a video reception size less than [640 x 480].
• If you use stabilization, please refer to the information listed in the following “Important” sections.
– The “Important” section in “Setting Privacy Mask” (P. 140)
– The “Important” section in “Setting View Restriction” (P. 123).
– The “Important” section in “Viewing Video with the Camera Viewer” (P. 60).
– The “Important” section in “Registering Presets” (P. 126).
– The “Important” section in “Setting View Restriction” (P. 123).
– The “Important” section in “Viewing Video with the Camera Viewer” (P. 60).
– The “Important” section in “Registering Presets” (P. 126).
Important
The intended effect may not be achievable, depending on the size and movement speed of the subject.
M50
M50