Canon VB-H651V 操作ガイド

Setting Page

109

Note

The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the
Digital PTZ of the Viewer (P. 75).

Camera Settings

Sets the camera settings at camera start up.

[Simple Camera Setting]
Recommended settings for [Camera Settings] are displayed according to the selected type. You can also change the

recommended settings as required and click [Apply].

[Focus]

Selects the focus.

[Auto]

Automatically adjusts the focus.

[Manual]

You can click and hold the [Near] and [Far] buttons in [Adjust Focus] to adjust the focus in the near and far directions.

When you click [Exec] in [One-shot AF], the camera will focus once using autofocus and then switch to manual mode.

Note

When using [Adjust Focus], it is recommended that you use [Adjust Focus] in [Camera Angle] > [Camera Settings] (P. 47).

[Fixed at infinity]

Fixes the focus at infinity, where camera focus adjustment is not required.

Type

Motion Priority

Depth Priority

Low Light Visibility

Data Size

Reduction

Standard Setting

Usage scenario

Reduces
vibrations for
moving subjects.

Focuses within a
wide range, from
near to far.

Brightens by
raising the
sensitivity for dark
subjects.

Reduces the data
size in low-light
conditions.

Cancels the
scenario settings
and restores the
factory default
settings.

[Exposure]

Auto (Shutter-
priority AE)

Auto (Aperture-
priority AE)

Auto

[AGC Limit]

[Shutter Speed]

1/1000 (sec.)

[Slow Shutter]

Disable

1/8 (sec.)

Disable

[Smart Shade
Control]

Disable

[Noise Reduction]

Mild

Standard

Strong

Standard

[Sharpness]

[Color Saturation]

[Haze
Compensation]

Disable

Important

Note the following regarding [Simple Camera Settings].

– [Motion Priority]: The range in which the appropriate exposure can be maintained becomes narrower.

Flickering may occur due to fluorescent lighting, etc.

– [Depth Priority]: The range in which the appropriate exposure can be maintained may become narrower.
– [Low Light Visibility]: Residual images may appear for moving subjects in dark situations.
– [Data Size Reduction]: Residual images may appear for moving subjects in dark situations.

H651