Canon VB-H651V マニュアル

Setting Page

5

189

Set the size ratio of moving objects for the entire screen.

When the setting values or slider is changed, an indicator representing the object size is displayed for one 

second in the center of the video display area allowing you to check the size ratio while specifying the setting.

Detection Status for Intrusion Detection

All moving objects detected are shown with profile lines.

When [Decision Point] of a moving object larger than [Object Size (%)] enters a detection area and exceeds 

[Duration (Sec)], its profile lines take on the same color as the detection area, indicating that “detected” mode has 

been triggered.

Configuring Operations for “Detected” ([Event] Tab)

Set operations to be performed upon detection of changes in a subject.

For details on settings, please refer to “Configuring Operations for “Detected” ([Event] Tab)” (P. 197).

Checking Event Status

If the intelligent function (moving object detection, abandoned object detection, removed object detection, camera 

tampering detection, passing detection, and intrusion detection) detects something, the event icon in that row turns green.

The detection status of auto tracking can also be checked in the Event and Input/Output menu of the Camera Viewer 

(P. 84).

Configure the size of the moving object needed to trigger detection in [Object Size (%)].

Important

After the Intrusion Detection is set, please confirm that the system continues to show profile lines of the detected moving object.

Detection Frame

Decision point (bottom center)

Object Size Indicator

Detection Area

Profile Lines of Detected Moving Object