Canon LV-7490 パンフレット
LV-7490 Expand Serial Command Functional Specifications
34
8.8 Lamp
Command
8.8.1 CF_LAMPMODE
Command
Command “CF_LAMPMODE_%1”[CR]
%1
“AUTO” ------------ Set lamp to Auto status
“NORMAL” ------- Set lamp to Normal mode status
“ECO1” ------------- Set lamp to Eco1 mode status
“ECO2” ------------- Set lamp to Eco2 mode status
“UP” --------------- The same operation as pressing Up key or Left key
“DN” --------------- The same operation as pressing Down key or Right key
“NORMAL” ------- Set lamp to Normal mode status
“ECO1” ------------- Set lamp to Eco1 mode status
“ECO2” ------------- Set lamp to Eco2 mode status
“UP” --------------- The same operation as pressing Up key or Left key
“DN” --------------- The same operation as pressing Down key or Right key
Details
Select Lamp Mode
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
This command is available in normal Power ON status.
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.8.2 CF_
LAMPLIFECONTRL Command
Command “CF_LAMPLIFECONTRL
_%1”[CR]
%1
“MODE1” ------------------------------- Set Lamp life control to Mode 1
“MODE2” ------------------------------- Set Lamp life control to Mode 2
“MODE2” ------------------------------- Set Lamp life control to Mode 2
Details
Select Lamp life control function
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
This command is available in normal Power ON status.
The value set by this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]