ASUS P9D-C/4L ユーザーズマニュアル

5

You must set the RAID mode in the BIOS Setup to be able to launch the RAID utilities before 

you can create a RAID set from the SATA hard disk drives attached to the SATA connectors 

supported by Intel

®

 C22x chipset. 

To do this:
1. 

Enter the BIOS Setup during POST.

2. 

Go to the Advanced Menu > SATA Configuration, then press <Enter>.

3. 

Set SATA Mode to [RAID].

4. 

Press <F10> to save your changes and exit the BIOS Setup.

• 

The LSI Software RAID Configuration Utility automatically configures to RAID 1 when 

the SATA to RAID Mode is enabled.

• 

The RAID setup screens shown in this section are for reference only and may not 

exactly match the items on your screen due to the controller version difference.

• 

When you create RAID sets with the LSI Software RAID Configuration Utility , the boot 

priority of the SATA optical drive has to be manually adjusted. Otherwise, the system 

will not boot from the connected SATA ODD. 

To launch the LSI Software RAID Configuration Utility: 
1. 

Turn on the system.

2. 

During POST, the LSI Software RAID Configuration Utility automatically detects 

the installed SATA hard disk drives and displays any existing RAID set(s). Press 

<Ctrl>+<M> to enter the utility.