ASUS PIKE 2208 ユーザーズマニュアル

2-30

Chapter 2: RAID configuration

This section explains how you can use the WebBIOS CU to view and change the 

properties for controllers, virtual drives, and drives.
WebBIOS allows you to view information 

for the LSI SAS controller. To view 

the properties for the controller, click 

Controller Properties on the main 

WebBIOS screen. There are three 

Controller Properties screens. The right 

figure shows the first screen.

The information on this screen is read-

only and cannot be modified directly. Most 

of this information is self-explanatory. The 

screen lists the number of virtual drives 

that are already defined on this controller, 

plus the number of drives connected to 

the controller.
Click Next to view the second Controller 

Properties screen, as shown in the right 

figure.

Click Next to view the third Controller 

Properties screen, as shown in the 

following figure.

The following table describes the entries/options listed on the second and third 

Controller Properties screen. We recommend that you leave these options at 

their default settings to achieve the best performance, unless you have a specific 

reason for changing them.