ASUS RS500-E7/PS4 ユーザーズマニュアル
第五章:BIOS 程序設置
5-12
5.4.2 CPU 電源管理設置
Adjacent Cache Line Prefetch [Enabled]
本項目為開啟或關閉默認的緩存線程。設置值有:[Disabled] [Enabled]
DCU Streamer Prefetcher [Enabled]
本項目為提供您啟用或關閉下一個 L1 data line 的 prefetcher。設置值
有:[Disabled] [Enabled]
DCU IP Prefetcher [Enabled]
本項目提供您啟用或關閉下一個基於隨著在載入記錄之上的 L1 線。設置
值有:[Disabled] [Enabled]
Intel Virtualization Technology [Enabled]
當選擇啟用(Enabled)時,可以讓硬件平台同時運行多重的操作系統,
啟用後可以讓一個系統來虛擬成數個系統。設置值有:[Disabled] [Enabled]
APIC Mode [Auto]
提供您選擇 APIC 模式,若設為 Auto,則會視需求使用 x2APIC,否則則
會使用 xAPIC 模式。使用 xAPIC 時將會關閉超過 254 的 CPUs APIC IDs。
部份操作系統則不支持 x2APIC 模式。設置值有:[Auto] [x2APIC] [xAPIC]
部份操作系統則不支持 x2APIC 模式。設置值有:[Auto] [x2APIC] [xAPIC]
Power Technology [Custom]
啟用電源管理功能。設置值有:[Disabled] [Energy Efficient] [Custom]
EIST [Enabled]
啟用或關閉 Intel SpeedStep 功能。設置值有:[Disabled] [Enabled]
This item allows you to
enabled power management
features.
→←:
Select Screen
↑↓:
Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
CPU Power Management Configuration
Power Technology
[Custom]
EIST
[Enabled]
Turbo Mode
[Enabled]
P-STATE Coordination
[HW_ALL]
CPU C3 Report
[Disabled]
CPU C6 Report
[Enabled]
CPU C7 Report
[Disabled]
Package C State limit
[C6]
Energy Performance [Balanced Performance]
Factory long duration power limit 95 Watts
Long duration power limit
0
Factory long duration maintained 1000 ms
Long duration power limit
0
Recommended short duration power1 1.2 * Long Duration
Short duration power limit
0