ASUS RS700-E7/RS8 ユーザーズマニュアル
第五章:BIOS 程式設定
5-30
5.4.11 WHEA 設定
Enable or disable Windows
Hardware Error Architecture.
WHEA Support
[Enabled]
WHEA Support [Enabled]
提供您啟用或關閉 Windows Hardware Error Architecture(WHEA)支援。設
定值有:[Disabled] [Enabled]
5.4.12 APM 設定
Specify what state to go to
when power is re-applied after
a power failure (G3 state).
Restrore AC Power Loss
[Last State]
Power On By PCIE
[Disabled]
Power On By RTC
[Disabled]
Restore AC Power Loss [Last State]
若設定為 [Power Off],則當系統在電源中斷之後電源將維持關閉狀態。
若設定為 [Power On],當系統在電源中斷之後重新開啟。若設定為 [Last
State],會將系統設定回復到電源未中斷之前的狀態。設定值有:[Power Off]
[Power On] [Last State]
State],會將系統設定回復到電源未中斷之前的狀態。設定值有:[Power Off]
[Power On] [Last State]
Power On By PCIE [Disabled]
[Disabled] 關閉 PCIE 裝置引起的喚醒事件。
[Enabled]
[Enabled]
啟用 PCIE 裝置引起的喚醒事件。
Power On By RTC [Disabled]
[Disabled] 關閉 RTC 引起的喚醒事件。
[Enabled]
[Enabled]
當設定為 [Eanbled] 時,RTC Alarm Date (Days) 與 Hour/Min-
ute/Second 選項則可以讓使用者自行設定想要的數值。
ute/Second 選項則可以讓使用者自行設定想要的數值。
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced