ASUS RS700-E7/RS8 ユーザーズマニュアル

Chapter 2:  Hardware setup

2-14

The system supports eight hot-swap 2.5” SATAII/SAS hard disk drives. The hard 

disk drive installed on the drive tray connects to the motherboard SATAII/SAS ports 

via the SATAII/SAS backplane.
To install a hot-swap SATAII/SAS HDD:
1.  Release a drive tray by pushing the 

spring lock to the right, then pulling 

the tray lever outward. The drive 

tray ejects slightly after you pull out 

the lever.

2.  Firmly hold the tray lever and pull 

the drive tray out of the bay.

3.  Remove the drive tray supporting 

pillar shown in the right figure.