ASUS RS300-E7/PS4 ユーザーズマニュアル

Chapter 2:  Hardware setup

2-10

The system supports four hot-swap SATAII/SAS hard disk drives and two SATAIII 

hard disk drives*. The hard disk drive installed on the drive tray connects to the 

motherboard SATA/SAS ports via the SATA/SAS backplane.

*Install the two SATAIII hard disk drives to HDD tray 1 and 2. Refer to page 1-6 

for details.

To install a hot-swap SATA/SAS HDD
1.  Release a drive tray by pushing the 

spring lock to the right, then pulling 

the tray lever outward. The drive 

tray ejects slightly after you pull out 

the lever.

3.  Take note of the drive tray holes. 

Each side has three holes to fit 

different types of hard disk drives. 

Use two screws on each side to 

secure the hard disk drive.

2.  Firmly hold the tray lever and pull 

the drive tray out of the bay.