ASUS P5N32-SLI Premium/WiFi-AP ユーザーズマニュアル

2-14

Chapter 2: Hardware information

Install the optional fan only if you are using a passive cooler or a water cooler. 

Installing the optional fan with an active CPU cooler will interfere with the airflow 

and destabilize the system.

1.   Position the fan above the pipe 

and heatsink assembly. 

2.   Fit the grooved edge to the 

heatsink.

3.   Carefully push down the fan until 

it snugly fits the heatsink, then 

connect the fan cables.

4.   The above photo shows the fans 

installed on the motherboard. 

•  Plug the optional fan cables to the CHA_FAN1 and/or PWR_FAN connector 

on the motherboard.

•  Make sure the optional fan is installed correctly to prevent damage to the 

fan and motherboard components.

Do not tilt the fan.

Do not install the fan with its rear side 

facing you. 

The photos in this section are provided for your reference only and may not 

match your actual fan and motherboard.