Intel SR2300 Tape Drive Cable Kit ASWTAPECABLE ユーザーズマニュアル
製品コード
ASWTAPECABLE
Order Number: A96890-001
Copyright © 2002 Intel Corporation. All rights reserved.
1
Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
Intel
®
Server Chassis SR2300
Tape Drive Cable Kit
Kit Contents
The kit contains the following:
• SCSI cable with integral terminator
• Power cable
What you must purchase separately:
• Intel
• SCSI cable with integral terminator
• Power cable
What you must purchase separately:
• Intel
®
Server Chassis SR2300
• SCSI tape drive
Installing Your Tape Drive
1. Observe all the safety precautions in your chassis’ manual.
2. Remove the tape drive from its packaging. Set any jumpers or switches according to
2. Remove the tape drive from its packaging. Set any jumpers or switches according to
the manufacturer’s instructions.
3. Remove the chassis cover.
4. Disconnect the flex circuit cable from the backplane.
5. Remove the processor duct.
6. Disconnect and remove the fan module.
7. Press the blue tab toward the hot swap drives to release the tape drive carrier.
8. Remove the tape drive carrier from the chassis.
4. Disconnect the flex circuit cable from the backplane.
5. Remove the processor duct.
6. Disconnect and remove the fan module.
7. Press the blue tab toward the hot swap drives to release the tape drive carrier.
8. Remove the tape drive carrier from the chassis.
OM14657
Figure 1. Removing the Tape Drive Carrier