ASUS RS400-E8-PS2-F ユーザーガイド

Chapter 2:  Hardware setup

2-20

You can install a supported Mezzanine card on the onboard slot.
To install a Mezzanine card:

1.  Remove the slot bay from the Mezzanine card

expansion slot.

3.  Match and insert the four (4) screw holes on the Mezzanine card into the four (4) stand

screws on the chassis, then insert the Mezzanine card to the slot on the motherboard.

1

2

3

4

1

2

1

AUXLED_CON1

2.  Prepare your Mezannine card and the signal cable. Connect the signal transmission

end (white) to the AUXLED_CON header on the motherboard.