Canon imageFORMULA CR-190i II Check Transport マニュアル
20
D
Click [Accessories], and then click [Run].
E
Enter “D:\SU190i\setup.exe” in the [Open] fields, and then
click [OK].
click [OK].
Installation starts.
F
Follow the instructions on the screen to complete the
installation.
installation.
IMPORTANT
The computer may need to be restarted, after the installation, depending on
the operating system. If this is necessary, make sure to restart the computer.
the operating system. If this is necessary, make sure to restart the computer.
The only way to connect the scanner to your computer is with a USB cable.
CAUTION
• Do not turn OFF the scanner or remove the interface cable when an
application is running.
• Turn OFF the computer and the scanner before changing the cable.
USB Connections
Connect the scanner and the computer with the USB cable provided
or a Hi-Speed USB 2.0 cable.
or a Hi-Speed USB 2.0 cable.
NOTE
Connect the type B plug (square) to the scanner and connect the type A plug
(flat) to the USB port on the computer.
(flat) to the USB port on the computer.
Connecting the Scanner to a Computer
Type A Plug
Type B Plug
USB Cable
USB Connector