Canon imagePROGRAF iPF840 MFP M40 マニュアル

 

Holding the paper on both sides, pull the jammed portion
out toward the front. Use a scissors or cutting tool to cut
away the printed or wrinkled portion.

Caution

When cutting paper, be careful to avoid injury and damaging the printer.

 

If the Carriage is on the left, move the Carriage to the right
until it stops.

Important

Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.

 

Hold the edge of the roll paper in the middle as you gently
pull it evenly to the position of the Ejection Guide (a). Align
the right side of the roll paper with the Paper Alignment
Line (b), keeping this side parallel to the line, and then low-
er the Release Lever.

Important

Do not force the roll paper into alignment with the Paper Alignment Line (b). This may prevent the paper
from being advanced straight.

If you pull out too much of the roll, an excessive amount will be cut away.

 

 

b

a

 

iPF840

                                                                                                                                                                                   

Clearing Jammed Roll Paper

                                                                                                                                                                                                                      

Troubleshooting

Problems Regarding Paper

607