Canon imageFORMULA P-208II Scan-tini Personal Document Scanner マニュアル
12
Moving the Scanner
When moving the scanner, always hold it with both hands to avoid
dropping it.
Make sure to disconnect any USB cables and when moving the
scanner. If the scanner is carried with these items connected, the
plugs and connectors may be damaged or cause the scanner to fall
and result in personal injury or damage to the scanner.
plugs and connectors may be damaged or cause the scanner to fall
and result in personal injury or damage to the scanner.
Handling
Note the following precautions whenever using the scanner. Failure
to do so may result in a fire or electric shock.
to do so may result in a fire or electric shock.
Never place alcohol, benzene, paint thinner, or other flammable
substances near the scanner.
substances near the scanner.
Do not allow water or flammable substances (alcohol, benzene, paint
thinner, etc.) to spill inside the scanner, as this may result in a fire or
electric shock.
thinner, etc.) to spill inside the scanner, as this may result in a fire or
electric shock.
Do not cut, damage, or modify the USB cable. Do not place heavy
objects on the cable, and do not pull or excessively bend the cable.
objects on the cable, and do not pull or excessively bend the cable.
Never connect the USB cable when your hands are wet.
Do not knot or coil the USB cable, as this may result in a fire or
electric shock.
electric shock.
Use only the USB cable supplied with the scanner.
Do not attempt to dismantle the scanner or modify it in any way, as
this is dangerous and may result in a fire or electric shock.
this is dangerous and may result in a fire or electric shock.
Do not use flammable aerosol spray products near the scanner.
When cleaning the scanner, turn the scanner OFF and disconnect the
USB cable.
USB cable.
When disconnecting the USB cable, grasp it firmly by its connector.
Do not pull directly on the USB cable, as this may damage or expose
the cable's internal wiring, resulting in a fire or electric shock.
Do not pull directly on the USB cable, as this may damage or expose
the cable's internal wiring, resulting in a fire or electric shock.
Clean the scanner using a slightly dampened cloth that has been well
wrung out. Never use alcohol, benzene, paint thinner, or any other
flammable substance.
wrung out. Never use alcohol, benzene, paint thinner, or any other
flammable substance.
If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the scanner, immediately close the
feed tray, turn the scanner OFF, and disconnect the USB cable. Then,
contact your local authorized Canon dealer or service representative
for further information.
strange odors, or the scanner does not function or other
abnormalities occur when you use the scanner, immediately close the
feed tray, turn the scanner OFF, and disconnect the USB cable. Then,
contact your local authorized Canon dealer or service representative
for further information.