Canon imageFORMULA P-208II Scan-tini Personal Document Scanner マニュアル
51
3
To check the scanned image, click the [Finish] button.
To edit scan images, see Operations for the scanned image edit window52.
Click the [
] button to edit the output settings. -> "Setting the output"
Click the [Cancel] button to discard the scanned image and return to the main
window.
window.
When the output has finished, a popup window will be displayed.
This completes the shortcut scans.
This completes the shortcut scans.
Scanning with Start Button
Scanning shortcuts" are allocated to the scanner start button in
advance.
You can set frequently-used scans to the scanning shortcuts, and
then allocate them to the start button.
advance.
You can set frequently-used scans to the scanning shortcuts, and
then allocate them to the start button.
If you place the document and press the Start button, CaptureOnTouch
starts and scanning starts.
starts and scanning starts.
If [Edit after scanning] is disabled in the scanning shortcut settings, the
edit window will not be displayed.
edit window will not be displayed.
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] button may not be displayed.
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] button may not be displayed.
If the [Do not display the main screen when the scan is started
with the scanner button] checkbox is enabled in the
Environmental settings, the main CaptureOnTouch window will
not be displayed when a scan is started from the start button.
Only dialog boxes, error messages, and completion popup
windows are displayed during scanning.
with the scanner button] checkbox is enabled in the
Environmental settings, the main CaptureOnTouch window will
not be displayed when a scan is started from the start button.
Only dialog boxes, error messages, and completion popup
windows are displayed during scanning.
If the [Do not display the main screen when the scan is started
with the scanner button] checkbox is enabled in the
Environmental settings, [Enable additional scan] and [Edit
after scanning] will be disabled when scanning is started from
the start button.
with the scanner button] checkbox is enabled in the
Environmental settings, [Enable additional scan] and [Edit
after scanning] will be disabled when scanning is started from
the start button.