Canon imageFORMULA DR-M140 Office Document Scanner マニュアル

23

A OPEN Lever

Raise this to open the upper unit.

B Document Eject Extension Support

Open this when scanning documents longer than 150 mm in 
length.

C Document Eject Tray / Upper Unit

Scanned documents are output here.
Open this when cleaning the inside of the scanner or replacing 
rollers.

D Document Feed Tray

Place the document.

E Document Guides

Align the document guides with both edges of the document to 
ensure that the document feeds straightly.

F Ventilation Holes

These cool the interior of the scanner. Do not block the ventilation 
holes, as doing so might cause overheating.

G Operating Panel

A range of scanning operations can be performed with this, such 
as starting and stopping scans, executing registered jobs, and 
cancelling double feed detection. (See p. 24)

H Power button

Press this to turn on the scanner. The button remains lit while the 
power is on.
Press and hold the button until the light goes out to turn off the 
scanner.
The power button lights or flashes as follows depending on the 
scanner status.

I Feed Selection Lever

Use this to change the way documents are fed.
Set the lever to the lower position when scanning documents 
consecutively. (See p. 27)
Set the lever to the upper position when scanning documents one 
page at a time or scanning multi-page documents that are fastened 
together. (See p. 27)

J LED Indicator (Orange)

This lights during non separation feeding mode.