Canon imageFORMULA DR-G1130 Production Document Scanner マニュアル

1-4

■ Never try to take the scanner apart or modify it in 

any way, as this is dangerous and may lead to a 
fire or electric shock.

■ Do not use flammable aerosol sprays products 

near the scanner.

■ When cleaning the scanner, turn the power switch 

OFF and disconnect the power plug from the 
power supply.

■ Clean the scanner using a slightly dampened cloth 

which has been well wrung out. Never use alcohol, 
benzene, paint thinner, or any other flammable 
substances.

■ If the scanner makes strange noises, or gives off 

smoke, heat, or strange odors, or the scanner 
does not function or other abnormalities occur 
when you use the scanner, immediately turn the 
power switch OFF, and disconnect the power plug 
from the power outlet. Then, contact your local 
authorized Canon dealer or service representative 
for further information.

■ Do not drop the scanner, or subject it to impact or 

strong shock. Should the scanner ever become 
damaged, immediately turn the power switch OFF, 
and disconnect the power plug from the power 
outlet. Then, contact your local authorized Canon 
dealer or service representative to have the unit 
serviced.

■ Before moving the scanner, make sure to turn the 

power switch OFF, and disconnect the power plug 
from the power outlet.

■ Do not install the scanner on a surface that is 

unstable or tilted, or in an area subject to 
excessive vibrations, as this may cause the 
scanner to fall, resulting in personal injury or 
damage to the scanner.

■ Do not block the ventilation openings. Doing so 

could case the scanner to overheat, creating a risk 
of fire.

■ Never place small metal objects such as staples, 

paper clips, or jewelry on the scanner. These items 
may fall into the scanner, and cause a fire or 
electric shock. Should such objects ever fall inside 
the scanner, immediately turn the power switch 
OFF, and disconnect the power plug from the 
power outlet. Then, contact your local authorized 
Canon dealer or service representative to have the 
unit serviced.

■ Do not locate the scanner in a humid or dusty 

location. Doing so may cause a fire or electric 
shock.

■ Do not place objects on top of the scanner. Such 

objects may tip or fall over, resulting in personal 
injury.

■ When unplugging the power cord, grasp it firmly by 

its plug. Do not pull directly on the power cord, as 
this may damage or expose the cord’s internal 
wiring, resulting in a fire or electric shock.

■ Leave sufficient space around the power plug so 

that it can be unplugged easily. If objects are 
placed around the power plug, you will be unable 
to unplug it in an emergency.

■ Do not allow water or flammable substances 

(alcohol, paint thinner, benzene, etc.) to spill into 
the scanner, as this may result in a fire or electric 
shock.

■ Turn OFF the power switch for safety when not 

using the scanner for a long period of time, such as 
overnight. Also, turn OFF the power switch, and 
disconnect the power cord from the power outlet 
for safety when the machine will not be used for an 
extended period of time, such as during 
consecutive holidays.