Canon imageFORMULA DR-G1130 Production Document Scanner マニュアル

4-8

■ USB Short Packet Setting

If the scanner does not operate normally when using the 
USB interface, change this setting to [OFF].

■ Tray Position Setting

The document feed tray should be set to fit the number of 
document sheets to be loaded. 

0: Up to 500 sheets
1: Up to 300 sheets
2: Up to 100 sheets

■ Key Repeat Setting

Selects the panel display method.
ON: The panel display scrolls continuously while a key is 

pressed.

OFF: The panel display scrolls each time a key is pressed.

Key repeat is valid in the following situations.
• When using the Job Function
• When selecting each of the functions in the User Mode

■ Total Counter

Displays the lifetime total number of document pages fed 
by the scanner.

■ Roller Counter

Displays the number of document pages fed since roller 
installation or replacement (pickup, feed, and retard 
rollers). Make sure to reset this counter when replacing the 
rollers. 

■ Imprinter Test

When the optional imprinter is installed, this function 
executes a test printing of the imprinter. 

■ Auto power OFF function settings 

Set the auto power OFF function. 
Select ON to enable the auto power OFF function, and if 
after 4 hours of inactivity, the power turns OFF 
automatically.