Canon imageFORMULA DR-C240 Office Document Scanner マニュアル

15

● When moving the scanner, always hold it with both hands to avoid 

dropping it.

● Make sure to disconnect the interface cable and AC adapter before 

moving the scanner. If the scanner is transported with these items 
connected, the plugs and connectors may be damaged.

Note the following precautions whenever using the scanner. Failure to 
do so may result in a fire or electric shock.
● Never use alcohol, benzene, paint thinner, aerosol sprays, or any 

other highly flammable substance near the scanner.

● Do not cut, damage, or modify the power cord. Do not place heavy 

objects on the power cord, and do not pull or excessively bend the 
power cord.

● Never connect the power cord when your hands are wet.

● Do not connect the scanner to a multi plug power strip.

● Do not knot or coil the power cord as this may result in a fire or 

electric shock. When connecting the power cord, make sure that the 
power plug is securely and completely inserted into the power 
outlet.

● The supplied power cord set is intended for use with this scanner 

only. Do not use it with other electronic equipment. In addition, do 
not use power cord sets other than the one supplied with the 
scanner. Doing so may result in fire or electric shock.

● Do not take the scanner apart or modify it.

● Never try to take the AC adapter apart or modify it in any way, as 

this is dangerous.

● Do not use flammable spray near the scanner.

● When cleaning the scanner, push the power button to turn it OFF 

and disconnect the power cord from the power supply.

● Clean the scanner using a slightly dampened cloth which has been 

well wrung out. Never use alcohol, benzene, paint thinner, or any 
other flammable substances.

● If the scanner makes strange noises, or gives off smoke, heat, or 

strange odors, or the scanner does not function or other 
abnormalities occur when you use the machine, immediately push 
the power button to turn it off, and disconnect the power plug from 
the power outlet. Then, contact your local authorized Canon dealer 
or service representative to have the unit serviced.

● Do not drop the scanner, or subject it to impact or strong shock. 

Should the scanner ever become damaged, immediately push the 
power button to turn it OFF, and disconnect the power plug from the 
power outlet. Then, contact your local authorized Canon dealer or 
service representative to have the unit serviced.

● Before moving the scanner, be sure to push the power button to turn 

it OFF, and disconnect the power plug from the power outlet

● Do not install the scanner on a surface that is unstable or tilted, or 

in an area subject to excessive vibrations, as this may cause the 
scanner to fall, resulting in personal injury or damage to the 
scanner.

● Never place small metal objects such as staples, paper clips, or 

jewelry on the scanner. These items may fall into the scanner, and 
cause a fire or electric shock. Should such objects ever fall inside 
the scanner, immediately push the power button to turn it OFF, and 
disconnect the power plug from the power outlet. Then, contact 
your local authorized Canon dealer or service representative to 
have the unit serviced.

● Do not install the scanner in a humid or dusty location. Doing so 

might cause a fire or electric shock.