Canon imageFORMULA DR-C225W Office Document Scanner マニュアル
28
6
Place the document.
Insert the document in the feed tray so that the front is facing forward and the
top is facing upward.
top is facing upward.
After inserting the document in the document feeder, align the document
guides with both edges of the document.
guides with both edges of the document.
z
When placing documents into the feed tray, take care not to
cut your hands on the edges of the paper.
cut your hands on the edges of the paper.
z
Make sure that the document does not exceed the loading limit
marks (
marks (
) on the document guides. Up to 30 pages of ordinary
plain paper (80 g/m
2
) can be loaded at the same time.
z
Before you place a document, check to make sure it does not
contain paper clips, staples, or other small metal objects.
These items may cause a fire or electrical shock, damage the
document, or cause a paper jam or scanner malfunction.
contain paper clips, staples, or other small metal objects.
These items may cause a fire or electrical shock, damage the
document, or cause a paper jam or scanner malfunction.
z
Do not wear loose clothing or jewelry that may get caught in
the scanner while you are using it. This may result in personal
injury. Be extra careful of neckties and long hair. If anything
gets caught in the scanner, immediately turn OFF the power
switch, and disconnect the power cord from the power outlet
to stop scanning.
the scanner while you are using it. This may result in personal
injury. Be extra careful of neckties and long hair. If anything
gets caught in the scanner, immediately turn OFF the power
switch, and disconnect the power cord from the power outlet
to stop scanning.
z
Always smooth out any folds or curls in your documents
before placing them into the feeder. If the leading edge of a
document is curled, it may cause a paper jam.
before placing them into the feeder. If the leading edge of a
document is curled, it may cause a paper jam.
z
If feeding stops due to a system error or paper jam while the
scanner is scanning, resolve the problem, make sure that the
scanned image of the last page that was successfully fed has
been stored, and then resume scanning the remaining
document pages.
scanner is scanning, resolve the problem, make sure that the
scanned image of the last page that was successfully fed has
been stored, and then resume scanning the remaining
document pages.
z
After you finish scanning, close the document feed tray to
prevent damage to the scanner while it is not being used.
prevent damage to the scanner while it is not being used.
z
Although standard feeding can be used in combination with
the straight path when scanning, multi-page documents will be
ejected in reverse order in such cases.
the straight path when scanning, multi-page documents will be
ejected in reverse order in such cases.