Canon REALiS WUX450ST D Pro AV マニュアル

14

To use the NMPJ function, you must install the NMPJ software (hereafter, “the 
software”) on the computers to be used.
Instructions in this manual are for installation in a Windows 7 environment.

Software system requirements are as follows.

Core 2 Duo P8600, 2.4 GHz or higher (32- or 64-bit)

1 GB or more

32 GB or more

Resolution: 1024x768 dots or more

Windows Vista (Business) SP2
Windows 7 (Home/Professional/Ultimate) SP1
Windows 8 (Pro)
Windows 8.1 (Pro)
* Windows Vista compatibility is limited to 32-bit editions.
* Both 32- and 64-bit editions of Windows 7 and later are supported.

In TCP/IP network environments, projectors can be connected to 
computers via the following LAN connections.
Wired LAN (1000BASE-T, 100BASE-TX)
Wireless LAN (IEEE 802.11b/g/n)

Display magnification:
Cannot be installed on computers with display magnification set 
higher than 200%.

Cannot be installed on computers without a minimum resolution of 
1024x768. Additionally, operation is not ensured if the resolution is 
switched to less than 1024x768 after installation.

• Operation is not ensured in other operating systems or editions.
• Menus are in English in all cases, except in Japanese and 

Simplified Chinese versions of the software.

• Operation is not ensured in operating systems other than 

English, Japanese, or Simplified Chinese OSes.

• Although the software also supports computer-projector 

communication over a router, operation is only ensured over one 
router hop. 

• If you are using an Aero style in Windows, this message may be 

displayed: “Do you want to change the color scheme to improve 
performance?”

• When using wireless direct connection, configure the computer 

to obtain a wireless IP address automatically (DHCP enabled). 
Note that it is not possible to use wireless direct connection with 
a projector that is not equipped with wireless LAN functionality.