Canon Océ VarioPrint 6000+ Series マニュアル
Feed the Stitch-wire
Step
Action
Information
1
Touch START .
2
Set the number of stitches to 6.
Touch
BASIC > STITCHES.
3
Hand-feed or print an A4 or larger
size test job.
size test job.
Enter the correct settings on the touch
screen according to the size and thickness of
the job.
The stitch-wire loads automatically during
the stitch head cycle.
screen according to the size and thickness of
the job.
The stitch-wire loads automatically during
the stitch head cycle.
4
Check that the stitch-wire is loa-
ded.
ded.
Check that a stitch is made. If needed, repeat
the previous step.
If a stitch is still not made, repeat the proce-
dure. Install the Stitch-wire into the Stitch
Head.
the previous step.
If a stitch is still not made, repeat the proce-
dure. Install the Stitch-wire into the Stitch
Head.
5
Reset the number of stitches on
the touch screen.
the touch screen.
Feed the Stitch-wire
128
Chapter 7 - Maintenance