Canon Océ VarioPrint 6000+ Series マニュアル
Step
Action
Information
4
Check the trim stop and remove any
pieces of trimmed paper.
pieces of trimmed paper.
In particular, check around the sensor.
The sensor is where you can see a red
and a green light (see illustration 'Loca-
tion of the sensor').
Small pieces of paper trimmings can
cover the sensor and cause an error
message.
The sensor is where you can see a red
and a green light (see illustration 'Loca-
tion of the sensor').
Small pieces of paper trimmings can
cover the sensor and cause an error
message.
5
Close the trim stop guard.
Push the trim stop guard into position.
Hold the locking plates in position and
tighten the orange hand screws.
Hold the locking plates in position and
tighten the orange hand screws.
6
Attach the trim bin.
Jam in the Trim Area
94
Chapter 6 - Error Conditions, Problems and Solutions