Canon PowerShot N2 White マニュアル
126
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
P Mode
IP address conflict
●
Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
●
You may be in an environment where Wi-Fi signals are obstructed.
●
Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth
devices, and other devices that operate on the 2.4 GHz band.
devices, and other devices that operate on the 2.4 GHz band.
●
Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
the access point), and make sure there are no objects between the devices.
●
Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
Memory card error
●
If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help
Desk.
memory card facing the correct way, contact a Canon Customer Support Help
Desk.
Receiving failed
Insufficient space on card
●
There is not enough free space on the memory card in the target camera to
receive images. Erase images to create space on the memory card, or insert a
memory card with sufficient space.
receive images. Erase images to create space on the memory card, or insert a
memory card with sufficient space.
Receiving failed
Naming error!
Naming error!
●
When the highest folder number (999), and the highest image number (9999)
have been reached on the receiving camera, images cannot be received.
have been reached on the receiving camera, images cannot be received.
Insufficient space on server
●
Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create
space.
space.
●
Save the images sent via Image Sync (
Check network settings
●
Check to make sure your computer can connect to the Internet with the current
network settings.
network settings.
A camera error was detected (error number)
●
If this error message is displayed immediately after a shot, the image may not
have been saved. Switch to Playback mode to check for the image.
have been saved. Switch to Playback mode to check for the image.
●
Frequent display of this error message may indicate camera damage. In this
case, write down the error number (Exx) and contact a Canon Customer Support
Help Desk.
case, write down the error number (Exx) and contact a Canon Customer Support
Help Desk.
File error
●
images that have been altered using computer software, even if the camera is
connected to the printer.
connected to the printer.
Print error
●
Restart the printer and complete the setting on the camera again.
Ink absorber full
●
Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
absorber replacement.
Wi-Fi
Connection failed
●
No access points were recognized. Check the access point settings (
●
A device could not be found. Turn the camera off and on again, and retry the
connection.
connection.
●
Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
●
The WPS buttons on numerous access points were pressed simultaneously. Try
reconnecting again.
reconnecting again.
No access points found
●
Check to make sure that the access point is turned on.
●
When connecting to an access point manually, make sure that you entered the
correct SSID.
correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
●