Canon CanoScan 5600F マニュアル

8

Scanning Film

This scanner can scan 35 mm film (film strip or slide). Follow the procedure below when scanning film.

Remove the protective sheet from the 

document cover.

Press and hold the levers at the top of the protec-

tive sheet 

c

 while you pull the sheet outward and 

detach it 

d

.

Insert the film into the Film Guide.

 

 

c

Open the Film Holder on the Film Guide, place 
the film face down.

d

Close the Film Holder.

e

Align the Film Guide’s tab with the FILM 
symbol on the document glass of the scanner.

• Store the protective sheet in a safe place so 

that it will not get bent or broken.

• Always put the protective sheet back when 

you are not scanning film to protect the light 
source in the document cover.

• Use a blower brush to remove any dust from the film, which will affect the image quality, and 

take care to hold the film by its edges to avoid transferring dirt or fingerprints to it.

• Do not block the Calibration Slot on the Film Guide when scanning film. Colors will not be 

scanned correctly if the Calibration Slot is obstructed.

• Close the Film Guide securely. Press lightly until it clicks into place.

Ensure that there is no gap between the edge of the film and the Film Guide on the side near 
the Calibration Slot.

Film Holder

Calibration Slot