Canon CanoScan LiDE 700F マニュアル

11

Scanning Film

This scanner can scan 35 mm film strip one frame at a time. Follow the procedure below when scanning
film.

Attach the cable for the Film Adapter Unit to the 

FAU connector on the scanner's side panel.

Open the document cover and place the Film 

Guide on the document glass of the scanner.

Align the Film Guide's tab with the FAU symbol on the 

document glass of the scanner.

Remove the cap from the Film Adapter Unit and 

gently set the Film Adapter Unit over the first 

frame in the Film Guide.

Align the tab on the Film Adapter Unit with the Film 

Guide.

• Do not connect other than the accompanying Film Adapter Unit to the FAU connector. Use of 

other units may lead to malfunctions of the connected unit and the scanner.

• Do not touch the metallic parts of the FAU connector.
• Clean the document glass before placing the Film Guide on it, otherwise dirt and dust can 

affect image quality or damage the film.

Insert the cable plug of the Film Adapter Unit 
all the way into the FAU connector.

You need to calibrate the scanner before scanning film for 

the first time. Do not place a film strip in the Film Guide at 

this point as it is not required for calibration.