Canon CanoScan LiDE 700F マニュアル

15

Positioning the Scanner

The document cover fully opens to allow easy scanning of

large or bound documents. An oversized document can be

scanned section by section into a single image using the

stitch-assist function of MP Navigator EX. For details, see the

on-screen manual: Scanning Guide.

Hold the document cover with one hand, and press and hold

 at the base hinge as you carefully lower the cover

all the way down.

If you are scanning thin documents (i.e., a single sheet or

double-folded sheet), this position saves the most space.

Thick documents or films cannot be scanned in this position.

Pull out the stand on the bottom of the scanner until it clicks,

and set the scanner upright on a flat stable surface. Gently

open the document cover as far as it goes (stops at

approximately 40°) and slide down the document along the

document cover.

Do not place items that weigh 2.0 kg (4.4 
lbs.) or more on the scanner. The scanner 
may not work or you may break the 
document glass if you press down the 
document glass firmly.

Cover the scanner with a black cloth if external light enters 

around the scanned item.

• Do not force the document cover open; it 

does not fully open when the scanner is in 
the upright position.

• Always close and secure the document 

cover first when lifting the scanner in the 
upright position.

Top

Alignment Mark

Bottom

Approximately 40°

Alignment 
Mark

Thin Item

Document 
Cover