Canon EOS-1D X マニュアル
47
Configuring EOS Utility Communication Settings
8
Save the settings.
Press <0> and turn the <5> dial to
select the set number, and then press
<0>.
select the set number, and then press
<0>.
After you turn the <5> dial to select
[OK] and press <0>, the connection
wizard closes and EOS Utility starts
up.
[OK] and press <0>, the connection
wizard closes and EOS Utility starts
up.
X
The <LAN> lamp on the camera lights
up in green.
up in green.
The EOS Utility network settings are now complete.
There is no need to complete pairing again if you continue using a
particular camera and computer together after pairing without
changing the settings.
particular camera and computer together after pairing without
changing the settings.
Users of EOS Utility Ver. 2.13 or Earlier
When using this function the next time, simply turn on the camera
and start the pairing software. The connection between the camera
and computer will be established automatically.
and start the pairing software. The connection between the camera
and computer will be established automatically.
You can add the pairing software to the software launched at startup
of your computer. On the [Preferences] [Basic Settings] tab in
EOS Utility, select [Add WFT Pairing Software to the Startup
folder]. (Macintosh users: Select [Register WFT Pairing Software
in Login Options].)
of your computer. On the [Preferences] [Basic Settings] tab in
EOS Utility, select [Add WFT Pairing Software to the Startup
folder]. (Macintosh users: Select [Register WFT Pairing Software
in Login Options].)