Canon EOS-1D X マニュアル
85
Handling Error Messages
Is EOS Utility ready for pairing?
X
Check that EOS Utility is ready for pairing (p.44).
Is the target computer on?
X
Turn on the target computer and wait for a while.
What to check on the camera
Is the camera’s network setting set to [Auto setting], or its IP
address setting set to [Auto assign]?
address setting set to [Auto assign]?
X
If you are not using a DHCP server, set the camera’s network setting
to [Manual setting] and IP address setting to [Manual setting] (p.17).
to [Manual setting] and IP address setting to [Manual setting] (p.17).
What to check on the DHCP server
Is the DHCP server on?
X
Turn the DHCP server on.
Are there enough addresses for assignment by the DHCP server?
X
Increase the number of addresses assigned by the DHCP server.
X
Remove devices assigned addresses by the DHCP server from the
network to reduce the number of addresses in use.
network to reduce the number of addresses in use.
11: Connection target not found
12: Connection target not found
21: No address assigned by DHCP server