Olympus LS-100 入門マニュアル
1
EN
8
Tro
ub
le
sh
oo
tin
g
Troubleshooting
Symptom
Probable cause
Action
Cannot recharge
[Battery] is set to [Alkaline].
Use the supplied rechargeable batteries.
Cannot find files
Wrong folder.
Switch to the correct folder (☞ page 37).
Noise heard during
playback
playback
The recorder was wiped or shaken
during recording.
during recording.
The recorder was placed near a cell
phone or fluorescent lamp while
recording or during playback.
phone or fluorescent lamp while
recording or during playback.
Move the recorder.
Unable to erase a file
The file is locked.
Unlock the file (☞ page 90).
The file is read-only.
Unlock the file or cancel the read-only setting of the
file on the PC.
file on the PC.
Unable to erase a
folder
folder
There is a file that cannot be
recognized by the recorder in the
folder.
recognized by the recorder in the
folder.
Connect the recorder to your PC and erase the folder.
No sound is produced
from a certain track in
the multi-track mode
from a certain track in
the multi-track mode
The track is muted.
Cancel the mute condition (☞ page 61).
The output volume of the track
is reduced.
is reduced.
Increase the output volume of the track (☞ page 61).
No sound from the
connected musical
instrument
connected musical
instrument
[Input Select] is incorrectly
set.
set.
Make sure the [Input Select] is correctly set (☞ page
82).
82).
The recording level is low.
Use the [Rec Level] dial to adjust the recording level (☞
page 37).
page 37).
[The [Rec Monitor] is set to
[OFF].
[OFF].
Set the [Rec Monitor] to [ON] (☞ page 87).
CD writing is not
available
available
The selected file is not enabled for
CD writing.
CD writing.
Select a PCM format [44.1kHz/16bit] file that is
enabled for CD writing.
enabled for CD writing.
Cannot be converted
to an MP3 file
to an MP3 file
The selected file is not enabled to
be converted to an MP3 file.
be converted to an MP3 file.
Select a PCM format [44.1kHz/16bit44.1kHz] file that
is enabled to be converted to an MP3 file.
is enabled to be converted to an MP3 file.
Cannot perform
bouncing
bouncing
The volume of the track is either
completely reduced or muted.
completely reduced or muted.
Check the volume of the track and the [ON/OFF] of the
mute (☞ page 61).
mute (☞ page 61).
The SD card does not have enough
free space.
free space.
Erase unnecessary files (☞ page 50).
Cannot use the tuner
[Input Select] is incorrectly
set.
set.
Check the connected musical instrument to set the
[Input Select] correctly (☞ page 82).
[Input Select] correctly (☞ page 82).