Olympus LS-100 入門マニュアル

In

se

rtin

g a
nd R
em

ov

in

g t

he S
D C
ard

Press the SD card all the way into the 
recorder and slowly pull it out.

• If [SD card] is selected in [Memory Select], 

the [Internal memory selected] message 
is displayed.

  Note

•  When you remove the SD card, it may swiftly 

pop out if you suddenly take away your finger 
that was pushing the SD card or push the SD 
card out by flipping it.

•  The recorder may not correctly recognize some 

SD, SDHC or SDXC cards depending on the 
manufacturer or card type due to compatibility.

•  Be sure to read the attached SD card manual 

before use.

•  If the SD card is not recognized, remove the SD 

card and then insert it again to see if the recorder 
recognizes it.

•  The processing speed may become lower de-

pending on the type of SD card. The processing 
performance may deteriorate if the SD card is 
repeatedly written to or deleted. In such a case, 
initialize the SD card again (☞ p.113).

•  For the SD cards certified according to our 

standards, refer to the support page on our Web 
site: 
http://olympus-imaging.jp/

  Although the manufacturers and types of SD 

cards whose operation we have certified are 
listed on our Web site, operation of these SD 
cards is not guaranteed. Note that it may become 
impossible to correctly recognize a listed card 
due to specification changes by the manufacturer 
or other reason.

If the SD card is in the write protection 
mode, the [SD card is locked] message 
is displayed.Clear write protection before 
inserting the card.

When the write protection switch is set 
to [LOCK], recording 
or other operations 
cannot be performed.