Olympus LS-100 入門マニュアル

Re

co

rd

in

g

•  When you have an SD card inserted in the 

recorder, make sure to check if your memory 
selection is set to [Internal memory] or [SD 
card] (☞ P.107).

•  To prevent losing the beginning of your record-

ing, make sure the PEAK indicator light (R) is lit 
before recording.

•  When the remaining recording time is down to 

60 seconds, the PEAK indicator light (R) starts 
flashing; as the time winds down (to 30 seconds, 
10 seconds, etc.), the light starts to flash faster.

•  No more recordings can be made when [Folder 

full] appears. Select another folder, or delete 
unnecessary files before continuing to record 
(☞ P.50).

•  No more recordings can be made when 

[Memory full] appears. Delete unnecessary 
files before continuing to record (☞P.50).

•  The performance of the recording medium may 

decrease after repeated writing and erasing. 
When this occurs, try formatting the recording 
medium (☞ P.113).

▌

You can use the metronome to help you keep 
accurate tempo during recording.

1

Set 

[REC Mode] to [

] 

(☞ P.79).

2

Select [Detail] from [Metronome 
Menu], and set [Display] to [ON] 
(☞ P.100).

• You can change the tempo and 

pattern of the metronome in [Detail] 
under [Metronome Menu] (☞ P.100).

3

Connect headphones to the EAR 
jack of the recorder.

4

Press the REC button to start 
recording.

• If [Countdown] is set, recording starts 

after the set count.

5

Press the STOP button to stop 
recording.

• When you stop recording, the 

metronome will stop as well.