Olympus e-3 取り扱いマニュアル

ページ / 156
129
EN
12
Information
*1 Can be changed using menu: 1/60 - 1/250 
g“#X-SYNC.” (P. 96)
*2 Can be changed using menu: 1/30 - 1/250 
g“#SLOW LIMIT” (P. 96)
If the optimum exposure cannot be obtained when pressing the shutter button halfway, the 
display will blink in the viewfinder and on the control panel.
* The aperture value at the moment when its indication blinks varies with the lens type and 
focal length of the lens.
Flash synchronization and shutter speed
Shooting 
mode
Shutter speed
Flash timing
Upper limit of 
synchronization 
timing
*1
Fixed timing 
when flash 
fires
*2
P
60 - 1/8000 sec.
1/ (lens focal length × 2) or 
synchronization timing, whichever 
is slower
1/250
1/60
A
60 - 1/8000 sec.
1/ (lens focal length × 2) or 
synchronization timing, whichever 
is slower
1/250
1/60
S
60 - 1/8000 sec.
The set shutter speed
1/250
k
M
60 - 1/8000 sec.
The set shutter speed
1/250
k
Exposure warning display
Shooting 
mode
Warning display 
example (blinking)
Status
Action
P
The subject is too dark.
• Increase the ISO sensitivity.
• Use the flash.
The subject is too bright.
• Decrease the ISO sensitivity.
• Use a commercially available ND 
filter (for adjusting the amount of 
light).
A
The subject is underexposed. • Decrease the aperture value.
• Increase the ISO sensitivity.
The subject is overexposed.
• Increase the aperture value.
• Decrease the ISO sensitivity or use 
a commercially available ND filter 
(for adjusting the amount of light).
S
The subject is underexposured. • Set the shutter speed slower.
• Increase the ISO sensitivity.
The subject is overexposured. • Set the shutter speed faster.
• Decrease the ISO sensitivity or use 
a commercially available ND filter 
(for adjusting the amount of light).
s0011_e_00_0_unified.book  Page 129  Wednesday, September 12, 2007  4:46 PM