Olympus e-3 取り扱いマニュアル
43
EN
3
Exposur
e
Allows you to set the aperture and shutter speed manually. You can check how much it
differs from the appropriate exposure by using the exposure level indicator. This mode gives
you more creative control, allowing you to make whatever settings you like, regardless of the
correct exposure.
differs from the appropriate exposure by using the exposure level indicator. This mode gives
you more creative control, allowing you to make whatever settings you like, regardless of the
correct exposure.
• The range of aperture values available varies with the lens type.
• The shutter speed can be set from 1/8000 to 60 sec.
• The exposure level indicator is displayed in M mode, showing the difference (ranging from
• The shutter speed can be set from 1/8000 to 60 sec.
• The exposure level indicator is displayed in M mode, showing the difference (ranging from
-3 EV to +3 EV) between the exposure value calculated by the currently selected aperture
and shutter speed compared to the exposure value considered optimum by the camera. If
the exposure value exceeds ± 3 EV, the entire indicator blinks.
and shutter speed compared to the exposure value considered optimum by the camera. If
the exposure value exceeds ± 3 EV, the entire indicator blinks.
Noise in images
During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are
caused when current is generated in those sections of the image pickup device that are not
normally exposed to light, resulting in a rise in temperature in the image pickup device or
image pickup device drive circuit. This can also occur when shooting with a high ISO setting
in a high-temperature environment. To reduce this noise, the camera activates the noise
reduction function.
During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are
caused when current is generated in those sections of the image pickup device that are not
normally exposed to light, resulting in a rise in temperature in the image pickup device or
image pickup device drive circuit. This can also occur when shooting with a high ISO setting
in a high-temperature environment. To reduce this noise, the camera activates the noise
reduction function.
g“Noise reduction” (P. 69)
The picture looks blurred:
j The use of a monopod or tripod is recommended when taking a picture at slow shutter speed.
To change the exposure adjustment interval:
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g“EV STEP” (P. 96)
To switch the operations of the main dial and sub dial:
j You can switch the functions that are set with the main dial and sub dial. g“DIAL” (P. 91)
x
Notes
• Exposure compensation is not available in M mode.
Manual shooting
Direct button
MODE + j[M]
To set the aperture value: Turn the main
dial.
dial.
To set the shutter speed: Turn the sub dial.
TIPS
Underexposure
Optimum exposure
Overexposure
s0011_e_00_0_unified.book Page 43 Wednesday, September 12, 2007 4:46 PM